Ok match this one up the 2013 Dart in the previous post.
What would rather pruchase?
Engine: 3.8-liter V-6 now goes Direct Injection, which helps bump the horsepower to 348 and torque to 295 lb-ft (using premium fuel).
BUT TIM!!!..COME ON NOW. The Dart only has 4 cylinders!!! True!!!
So for the Genesis – 2.0-liter inline-four is now paired with a twin-scroll turbocharger and improved intercooler, with that yielding 274 hp and 275 lb-ft, again with premium fuel.
(And my last look, unless someone drives one through my house and parks it in the living room!!!! )
You’d think the heat Chrysler took for making the Charger a 4 door…they would have come up with something better looking than a Dodge Neon look-a-like!!!! (I’m a previous Dart owner w/318!!)
But wait… the engines….oh I’m sure there something special there:
Barrett-Jackson‘s upcoming Scottsdale event later this month is shaping up to be an exciting affair, with all sorts of classic and modern hardware crossing the block. One of the latest to join the party is the SMS-Bondurant Camaro.
Presented by Steve Saleen and Bob Bondurant, the special SMS supercharged 6.2-liter V-8 Camaro gets a rating of 620 horsepower, 570 lb-ft of torque, a six-speed manual transmission, Borla exhaust, “Red Butterfly” hood, Eibach S suspension, custom 20-inch SMS wheels, and the autographs of both Saleen and Bondurant on the dash.
It’s production car #001 of the new collaboration, and it’ll be auctioned to benefit the Make A Wish and COX Charities foundations.
Mopar, Chrysler Group’s custom parts branch, has announced that a modified 2012 Chrysler 200 and an altered 2012 Dodge Charger have joined its lineup. The 2012 Chrysler 200 Super S and Dodge Charger Redline are dressed in the latest Mopar accessories, giving each an “in-your-face” look. While the Charger already possessed bold exterior attributes even before Mopar’s help, the Chrysler 200 gets a little more self-confidence courtesy of two different packages that can be added on.
“The Super S is Mopar’s interpretation of the Chrysler 200,” said Pietro Gorlier, President and CEO of Mopar, Chrysler Group LLC’s service, parts and customer-care brand. “The extensive list of high-quality Mopar parts enhances the performance and appearance of our Chrysler 200.”
Two packages are available to dress up the 2012 Chrysler 200. The first is called Stage One, which is primarily an appearance package which refines overall styling on Chrysler’s smaller sedan. The Stage Two goes under the hood adding a cold-air intake and a cat-back exhaust system. A cold-air intake is added to boost engine efficiency and performance while a cat-back system gives that extra engine note that may be missing while rolling at lower speeds. Coil-over suspension is also added to enhance the overall ride feel.
The 2012 Dodge Charger Redline receives a few more options than the Chrysler 200 Super S. Mopar’s variant of the Charger is based off of the R/T model and can be dressed in three different packages. Stage One adds exterior styling cues such as a Mopar carbon fiber chin spoiler, “crosshair” grille, carbon fiber door scoops designed to enhance aerodynamics, and the interior also gets a few new accents. Stage Two is adds Mopar bolt-on parts to boost power, handling, and braking. These features include a cat-back exhaust system, cross-braces under the hood to enhance handling, and brake linings to bring the Charger’s Hemi V-8 to a halt quickly. Stage Three adds a 426 HemiV-8 engine which holds the reigns to 590 ponies, 220 more than what’s found in the regular Charger R/T. Known as the “elephant motor” this lightweight aluminum V-8 shaves off more than 100 pounds from its cast-iron siblings. Cast-aluminum valve covers and billet fuel rails are also included in Stage Three of the Charger’s performance kit.
“Since the 1960s, the Mopar Brand has built a long history of adding power and performance to the Dodge Charger—and with the Redline, we Moparized the new Charger with modern-day performance and style while giving a nod to our storied past,” said Gorlier. “With three kits, Mopar offers a tailored choice for every customer.”
Both vehicles are set to debut at the 2012 North American International Auto Show in Detroit next week. Which vehicle are you most excited to see? Tell us which one you picked in the comment section below.
Whether you’ve seen a Ford Mustang Boss 302 in shambles, one tearing up the track, or perhaps another upon the showroom floor–it doesn’t matter. Bottom line is, we’ re pretty sure anyone with a blue-blooded pulse wants one. So, if you are one of the lucky ones to get your paws upon the steering wheel consistently, then you might want to listen up. Steeda Autosports now has a complete line of aftermarket parts to amp up the already awesome 2012 Boss 302 in order to tweak the suspension, intake, and some additional custom tuning to make every droplet of atomized fuel count.
So just what all’s in store? Keep reading to get the rest of the story via Steeda & be sure to check out their site loaded with offerings!
Steeda News Release
Steeda Offers a Full Line of Boss 302 Performance Products
The new Ford Mustang Boss 302 is viewed by many as the best overall Mustang Ford has ever produced. As good as it is in original form Steeda has found ways to improve it and take it to the next level.
Starting with the suspension, the Steeda Boss springs are designed to slightly lower the vehicle in the front and lower the rear approximately 3/4”. With the front height remaining largely unchanged, the front roll center geometry remains optimal. However, by substantially increasing spring rates, body roll is reduced as is nose diving during heavy braking. Thanks to our years of experience with Mustangs, we are able to do this and still maintain near stock ride quality characteristics.
We have also designed several levels of suspension packages that include our awesome Boss springs, adjustable front and rear swaybars , adjustable upper strut mounts and more to achieve the maximum handling potential of the Boss 302 Mustang.With the new Boss 302 Mustang comes the new Boss 302 engine. We took our years of experience building performance proven cold air induction kits and designed a kit tailor made for this heavy breathing new engine. Starting with a high flow filter we added our “race tested” velocity stack” entry, this is located within a stainless steel heat shield with a rubber gasket to seal it against the hood. We also retain the factory cold air feed duct from the front bumper. We then added a 101mm MAF housing which is coupled to a new high flow inlet tube with our Cool-Tube technology. All of this adds up to 30 plus horsepower when combined with the required custom tune that compensates for the increased airflow.
So, if you are looking to get the most out of your Boss 302 Mustang, look no further than Steeda Autosports!
When the Ford Mustang Boss 302 debuted as a 2012 model, Ford threw out many of the standard options in favor of performance-specific parts. This also included a number of color options, leaving buyers with fewer palette choices than a comparable Mustang GT. One of the most popular colors, Grabber Blue, was unavailable on the 2012 Boss 302 Mustang.
But it will be available on the 2013 Boss 302, as the recently-released 2013 Mustang guide revealed. Now we have the first pictures of a Grabber Blue Boss 302, thanks to eagle-eyed forum members over at The Mustang Source.
Grabber Blue first appeared on Boss 302 Mustangs in 1970, and it remains popular with Mustang buyers today who flock towards the traditional pony car color. So it raised more than a few eyebrows when Ford did not offer Grabber Blue on the 2012 Boss 302 Mustangs. Rather, Ford offered five other colors; Competition Orange, Race Red, Yellow Blaze Tri-Coat, Kona Blue Metallic, and Performance White.
Yet Ford did sell a one-of-one Grabber Blue Boss 302 Laguna Seca Edition Mustang at the Barrett-Jackson auctions earlier this year. And judging from these pictures, the standard Boss 302 Mustang looks just as great in Grabber Blue as we thought it would. Grabber Blue will be joined by School Bus Yellow as well. Gotta Have It Green will also be offered on 2013 Mustangs, though no word on if the Boss 302 will also have the option. However, if Ford is keeping with the tradition of offering Grabber colors in the second year of Boss Mustang production, well why wouldn’t they offer a Gotta Have It Green option?
Ok…I sorry (not really) but I have to consider what my readers like. And to date one of the most read articles on my blog is the piece I did on the Mustang II King Cobra http://wp.me/pKHNM-uY . (Go ahead you know are going to go read it!!)
So I’m going to do a series on the Mustang II (after all I’m project managing the restoration of a 1975 VW, I could spend sometime on that era Mustang). We’ll touch on the 4 and 6 cylinders and yes there was a 302.
So we’ll start with a history lesson.
1973 was the last year for the more powerful and larger bodies Mustangs. Ford may have thought they were going back to the original size Mustang and the 1974 version was in fact close to that size. The 1966 Mustang had a wheelbase of about 108 inches ( 181.6 inches in total) and the 1974 was 96.2 (175.0 inches over all). Compare to the 1973 which (depend on which version) was 187.5-190.0 inches over all.
The generation ran from 1974 to 1978 and sported some collectible cars, the King Cobra and Mach I…yes Mach I’s in a Mustang II.
Well, I’m officially depressed. No it’s not because of the holidays, or the rapidly approaching June when I’ll move too far into the 50’s to be able to fool myself that I’m just barely 50, nope none of those things.
I’m looking at GM’s (bastards!!) Performance Catalog and all the shiny things in it. Like the ported LS3 heads, and the LS376 – 525…yes 525 hp in a crate engine, drop in and drive. I realize two things, I need an older Chevy to play with (or upgrade the C6 Vette) and that I’ll need a second job if I even want to touch any of this stuff and where will I live when the better half finds this stuff laying around the garage? (Tell me you aren’t depressed now?!?!!…It’s ok…admin it!!!)
Note: It’s gonna get worse… I have the Ford performance parts catalog as well…all I can say is thank GOD!!! I don’t have a Morpar to drive around….oh….the therapy…bills….!!! Why, OH Why didn’t I drink the family KoolAide when I was a kid..I would have been able to shun the Fords and Mopars and just be a normal one brand car guy??
There is some awesome stuff the Chevrolet Performance Team is put out, everything from small block crates to LSX monsters, to circle track crate engines.
Over the next few post I’m going to cover a few highlights and a couple unexpected – like engines for the Chevy Cobalt and some V6 engines. (Have just read some specs for the upcoming 2013 Mustang V6 – I want to see what Chevy’s got.)
In fact let’s start with something off the wall. Like the 900 V6 Intake for a 4 barrel carb!! What???!!!! It’s an aluminum high-performance for the 3.8 or 4.3 liter V6. So go ahead bolt on that 390 cfm carb..oh heck….grab that 600 cfm 4150 and drop it on top.
That is not a bad price. Of course it’s not for all heads, like it won’t fit the 3800 V6 or the 18 degree heads and you might have add a bump to your hood for clearance!!!
The engines for the 1973 Mustangs pretty well with the rest of the matched up the other models engines, but with some minor “tweaks”.
You couldn’t get a Mustang with a 4 cylinder (yet) but you could get with the standard 6. This was the 250 version, (250 cubic inches of displacement) the bore and stroke was 3.68 x 3.91 also used in the Torino. Topping it with a single barrel Motocraft carb and coupled with a compression ratio of 8.0:1 gave it a ground pounding horse power rating of 88 (Oh don’t worry, it gets worse in 1974).
302 remained the same for the Mustang and was the standard for the Mach 1. The 351’s (Cleveland and Windsor were available and they really remained the same as those for the other models.
Now you might be saying, ‘Well Tim, seems like you typed yourself in to a corner here. Those engines are the same.” But here is what made the differences – options!!!
With special intakes, valve springs, dampers, large 4300 D carbs, 2.5 inch diameter dual exhaust outlets and modified cam, you now talking increased breathing and exhaling capacity. Which we all know means…say it with me…..”MORE HORSE POWER!!!!!” But how much? I’m glad you asked.
The 351 with these types of option produced between 246 and 266 horse power. The 302 doesn’t show being configured with anything other than the stock options.
January 6th, 2012 
aunik_aronno
