My Blue Beetle – Posted by Malc

Do you like VW‘s?  Then you’ll love to visit  http://bandwagen.wordpress.com.   This is a great looking bug!!!  I’m glad he didn’t turn it into a drag car.

This blue Cal-look beetle was in my life for twenty two years. I purchased it with a friend back in 1988 with the intention of building a drag-car to enter the recently formed VWDRC. The basic plan was to weld up the doors, cut off the roof, fit a roll-cage and run a more or less stock 1600 engine on methanol and nitros oxide… this was back in a time when you could pick up as many used and running engines as you wanted, for around £50 each! The car only cost us £100 so we figured as long as we got a few quarter-mile runs out of each engine before they blew, it would be fairly inexpensive but fast fun!

As you’ve probably guessed from the pictures, the plans changed drastically when my friend lost interest in the bug. Thank god he hadn’t got around to hacking the roof off! I bought his share in the car and decided to use it as the basis for a Cal-look project. Over the next couple of years I started collecting parts and in 1990 it went into the body shop to fit the early panels, some de-chroming and a respray in Ford electric blue.

Once painted, I rented a small, two-car barn on a local farm with another friend who was also working on a project beetle. The bug slowly  came together over the following eight years. I’d work on it when time and money allowed which wasn’t too often – I was in my 20s and money was tight so there were usually other things that had to take priority, like paying the mortgage and food!

After a final push it was all together and driving in 1998 and I made it along to the Stonor Park VW show that year. Things have been updated and changed over the years including the addition of the 4″ narrowed beam in 2009 which was just before I decided to sell it. This beetle only covered 8,500 mile in the 22 years that I owned it which must be some kind of record! It’s still fairly local to me and owned by a friend of the guy who bought my ’72 Bay-window camper, but as they say, that’s another story…

Body:
Pre-67 front and rear valances, early wings and lights (US-Spec fronts containing orange indicators)
Long-bonnet and glass W-decklid.
Cal-look window rubbers.
De-chromed with smoothed/hidden catches on front and back lids.
Grey tinted one-piece door glass and matching rear side glass.
Stainless-steel blade bumpers.
Bodywork and paint by Paulespury coachworks in 1990 (still looks great!)

Running gear:
New front suspension set-up fitted by Sayed @ Batts VWs in 2008 comprising of:
4″ narrowed and adjustable front beam, custom built by Gavin @ Trailer Queen Restos
CB Dropped spindles
New KYB Front shocks
Long-travel ball joints
Rear…
Adjustable Koni shocks.
New IRS gaiters
Type 3 IRS Gearbox
UVA Adjustable rear spring plates.
Copper brake pipes fitted throughout
Standard drums and disks re-drilled to Porsche 5-stud (VW 4stud fitment still retained as well)

Wheels & Tyres:
Fully-polished early Porsche fuchs, 5.5×15 fronts and spare with 185/55R15 Continentals
Original deep 6×15 rears with 185/65R15 Nankangs

Engine:
Built by Sayed @ Batts VWs and fitted in Feb 2000 (only done 6K miles!)
1641cc fully balanced.
Twin 36 IDF webber carbs with hex-bar linkage.
Engle 110 Cam.
040 Cylinder heads.
Hi-volume oil pump.
Remote oil filter with braided lines.
009 Distributor and Bosch blue coil
Polished, louvered stainless firewall.
Engine tinware painted electric blue.

Interior:

Grey vinyl/velour high-back sports with matching side panels and rear seat.
 Grey carpets.
Grey cloth headlining. 
Short-throw T gearshift.
 Custom painted speedo.
Grey sports steering wheel. 
Fire extinguisher. 
80s Pioneer cassette player with 4x speakers on custom rear parcel shelf.
 Auto-watch Alarm & immobiliser.
 Billet dash knobs and door handles/window winders and buttons.
 Additional oil temp gauge.

 I say…Nicely  done!!!

Thanks for reading

Tim.

NEW VETTE OWNER!!! Steve’s 1990 C4

Well another reader (long time reader) has gone where few dare to tread.  Yes I’m talking a Ford car guy, a Thunderbird owner and former owner of a very cool  Mercury Cougar wagon, is now a proud owner of a    1990 C4 Corvette!!!!

It’s a great looking Steve!!!!!!

Steve’s White C4

It’s in great shape and I am liking the wheels!!!

I’m sharing this Steve!!!!

Tim,

As a Ford guy I guess I’ve come over to the dark side.

I bought a 1990 standard Corvette with all the sporty stuff. Seats, suspension and all the electronic gizmos.

Super well cared for condition with all maintenance history since new. I does have a worn right muffler cushion.

Last evening was my first ride ever in a Corvette and of course I was driving. Rides rougher than a cob on a rough road as expected.
It also makes all the cool dual exhaust music. Two tops, one glass and more switches and gauges than I’ve ever seen before. No deterioration of the
interior or paint so it must have been garaged. It also has a fine sounding Bose system which was standard I think.
I did find a 1/8″ chip on the drivers front fender.

Yup, I’m on the dark side and was wooed by the devil himself to get me in a Chevy…..
We have some streets in various stages of reverting to dirt here. Some very rough streets. The right muffle mount is collapsed (rubber) so it rattles. Roof panel does not rattle at all.

It’s in quite good condition for 22 years old. No interior or exterior work required.

It runs sooooo good. I think it may have never been driven in the rain. Underneath looks new, no tarnishing of the aluminum suspension bits.

The PO provided replacement “dew wipes” for the doors and a new power antenna that’s to replace the one that is stuck up. Please don’t tell me I have to remove the rear fascia to replace the antenna. LOL.

I did manage to scare myself a bit last Saturday. I’m not used to a posi-trac rear end…Ha Ha. Just a little sideways. It sure accelerates quicker than expected for only 245 horses. I’m averaging high 17’s around town which actually is unexpected. I guess the trick is 345 lbft or torque……..”

Thanks for sharing your Vette Steve…..NOW LETS TALK ABOUT SOME MODs!!!

Thanks for reading.
Tim

27th Annual Chevy Showdown, Tucson, AZ Part 4

Here is a great ’57 Chevy that was so well done, I had to take some video.

 

[vodpod id=Video.16447529&w=425&h=350&fv=]

posted with vodpod

 

 

 

  

posted with vodpod

 

[vodpod id=Video.16448093&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FAll%252520Chevy%252520Car%252520Show%2525202012%252FMVI_9787.mp4]

posted with vodpod

 

 

posted with vodpod

This was a fantastic Car!!!

Thanks for reading
Tim

27th Annual Chevy Showdown, Tucson, AZ Part 3 – The Trucks

Next up…The trucks.

There were some beautiful and well done trucks at this show. Check them out!!

This pick-up was off in a corner of the lot...

There was a window crank between the two front windows for opening them up.

More coming up.

Thanks for reading.

Tim

27 Annual Chevy Showdown, Tucson, AZ Part 2 – Corvette Action

Here is Part 2  this is the Corvette action.

First I really liked this striping on this ’77 Vette.

 

Look closely at the next few photos the stripe moves from dark to almost white.

 

 

 

Oh...and the stance on this is just extraordinary!

 

One more 77 .

One on looker called this a plain jane Vette, I told him there's no such thing!!!

 

Here are the 50’s era Vettes.

 

A little video clip…I didn’t add the music.

 

 

And the 60’s Vettes.  The silver 63 is Steve Fagan’s.  Owner of Hot Rods and Classics, located here in Tucson.  They do great work including a lot of my engine work for the Mustang, which helped me win my First Car Show Trophy!!  His Corvette has taken two trophies in the last two shows.

Steve Fagan's 64

Little more of Steve’s StingRay

[vodpod id=Video.16447235&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FAll%252520Chevy%252520Car%252520Show%2525202012%252FMVI_9708.mp4]

Steve’s, posted with vodpod

The driver in the red Vette caused a few nervous moments as it took her a few tries to get into that parking spot.

Here’s another shot of the 60’s Vettes

1960's

Coming up next -the trucks!!!

Thanks for reading.

Tim

 

 

27 Annual Chevy Showdown, Tucson, AZ Part 1

27 Annual Chevy Showdown sponsored by Classic Chevy Club of Tucson and held at  Catalina Foothills High School.

So for the next few posts, sit back and enjoy the show. (Ok…no whining about some of the Videos….  (:^))

I loved the collection of Corvairs.  Oh…and wait until you see the one with the V8 shoved inside.

The Corvairs:

Yenko Stinger 1

Yenko Stinger Engine Compartment Cover (rear hood?) Love the vents.

WHAT!!?!?!?!? YES!!!!!

Yenko!!

Corvair - Drop Top

Chromed!!!

The Yenko and a late arrival.

Are you ready for this?   Next two videos – the Corvair with the V8.

Thanks for reading.  More coming up.

Tim

It’s Spring Time….and Beehives are the Buzz Part 2

Resistance

If there is one challenge to the beehive revolution, it’s the perception of the masses. While most engine builders and performance enthusiasts know that the beehive works to improve their engines, many don’t realize the true benefits. Some established enthusiasts are confused and concerned that the smaller valve retainer and single spring used in the beehive system are capable of handling the same high performance loads carried by the conventional spring with two coils.

Beehive springs are a precision component just like any part you select for your engine. Using a tech line expert to help find just the right Beehive springs is critical to your engine’s ultimate performance and durability.

“There are some very knowledgeable engine builders who don’t understand how a single coil spring can be better than a dual conventional spring,” stated Thomas Griffin Head valve spring engineer for COMP Cams.

“The fact is the beehive springs, by virtue of the ovate spring shape and a variety of internal upgrades is compatible with virtually any application where a dual spring is used. That includes some engines with mechanical roller camshafts. The key is to review the required camshaft load and assess the aggressiveness of the camshaft.”

The key profile consideration of a camshaft can be denoted in the camshaft profile section. By reviewing the duration specs for your potential camshaft at 0.050-inch lift and again at 0.200-inch lift, the shape of the lobe can be projected. These are the key figures engineers use to determine beehive spring compatibility. Currently beehive springs for camshafts measuring up to 0.750-inch lift are available.

COMP Cams engineers used a Spintron machine to determine exactly what happens with valve spring dynamics at all levels of engine rpm. This high tech sensor was installed after cutting the cylinder head to make room. The Spintron data noted improved performance at reduced valve seat pressures, among other benefits previously mentioned.

It’s Spring Time….and Beehives are the Buzz Part 1

No this isn’t going to be one of those talks and no we aren’t going to run out and hung a tree, ok…if you must…go ahead I’ll wait…..(insert bored whistling)……(more bored whistling)…..Ok…are you done?!!

As I get closer to getting the heads on the Mustang, I’m going to have to begin picking any changes I want made to the CJ heads. While cruising the web checking out options, I ran across this piece (Corvette related but springs are springs as far as an engine is concerned) and there are some good tips here.

Good reading.

Beehive Springs Sound Great, But Will They Work For You?

by on April 18, 20

Quick! What the fastest moving component in your engine? If you’ve taken a hint from the title of this article, you probably guessed correctly – it’s your valve springs, those tight little bundles of joy that open and close your engine’s valves.

Beehive springs come in a variety of shapes and sizes. The benefits of moving to Beehive springs where possible (and today few situations are not Beehive compatible) are many.

Beehive springs, such as those offered by COMP Cams, offer a huge number of benefits over stock-style cylindrical springs; reduced valve spring mass, faster valve acceleration, increased valve train rigidity, reduced valve train component stress and a whole laundry list of other positives.

Best of all, the word has gotten out and folks all over the country are using them for a wide variety of applications from street performance to extreme racing endeavors. That’s a really good thing.

Along with their success has come some confusion over exactly which beehive is right to purchase. Currently there are over a dozen beehive spring styles out there, each offering some unique take, be it in the seat pocket diameter, ovate wiring diameter, pitch or internal spring “frequency.” Regardless increased selection has bred some minor confusion, albeit easily cured.

Beehive springs are conical shaped springs that employ this powerful shape in the creation of a spring that can deliver both excellent performance and lowered seat pressures. With lower seat pressure, valve train components (especially the pushrods, rockers and lifters) are less stressed to perform the same work.

This beehive spring weights in at 99 grams, while a comparable conventional spring is 121 grams.

The difference between beehive and conventional cylindrical springs is obvious especially when you compare them in this manner. Note the dramatic difference in retainer diameter equating to less valve train weight.

According to COMP, effective beehive springs can support an additional 700rpm over stock cylindrical springs. How? It just stands to reason that the smaller coils at the top of the spring don’t require as much force to get the valve moving quickly, much quicker than conventional style springs. The higher rpm potential equates to better durability and performance.

There are some very knowledgeable engine builders who don’t understand how a single coil spring can be better than a dual conventional spring.

“Its like watching a race car running 60-foot elapsed times on the drag strip,” stated Bill Godbold, Chief Engineer for COMP Cams. “For example, take two identical cars with equivalent 500 hp engines.

“One has stock suspension and the other a sophisticated racing suspension. The car with the race suspension will get going more quickly and achieves better 60-foot time. The same principle works with beehive spring mechanics.”

 

Thanks for reading.  Part II coming up.

Tim

Taking the Vette project for a test drive.

image

You know the feeling.  When you JUST have to take ‘her’ out for a spin – no matter the condition.

You can’t see in this pic, but there’s no hood, no t-tops and lots of body work to be done….. but great looking rims and new meat (tires)…it was running a bit rough but still sounded good!!!

Got an unfinished project but still take it for a spin.  Post up  a note and a pic.

Tim

Pics Vette and Mustang

Sometimes you just can’t pass up a pic.  This one was from

Rudy Morganti over on Corvette Pals
Being a Mustang and Vette owner..this one I appreciate

Own Two Muscle Cars? Tell me about them.

 

Own Two Muscle Cars? Tell me about them.

Tim