Category Archives: Auto Restoration

Reader’s Car: 1970 Mustang Export to The Land Down Under – Pete’s Ride.

By | | , , , , ,
1 Comment

Nothing is better than hearing from a reader, unless that reader send pictures of his ride.

Pete has a beautiful 1970 Mustang coupe out in Western Suburbs of Sydney in New South Wales.

Hi Tim,

Attached are a couple of pictures, one when I got her with wheels, didn’t like them so I put on another set, (the Boyd’s one). The wheels on the car when I bought them were from a 96-02 cobra GT so they had the wrong offset, with that, it meant it needed spacers. The Boyd’s need no spacers, correct offset.

Engine mods done via previous owner;

  • Trickflow twisted wedge heads, roller rockers
  • Flowtech custom roller camshaft
  • LSD 3.55 8’3/4” ford diff
  • Biggs performance 650 double pumper carb
  • Weiand stealth intake manifold

To date I have done the following;

  • Replaced rear leafs with reverse eyelet leafs, they had normal ones with lowering blocks before
  • Put a Mallory large HEI distributor (don’t hate me)
  • Converted from automatic to manual (4 speed toploader, 11
    “ clutch setup)
  • Stereo, though I rarely listen to it, the engine is music to my ears
  • Replaced leaky power assist steering with all new manual steering
  • 5” exhaust throughout, pacemaker headers, which is where my current problem is

 

Regards,

Pete

Pete says he’s had this beauty “About 4 years or so now I’ve had it, been interesting with the level of fixing that she needs, I had an Aussie version of the Chevelle and that was solid. Still prefer the sound of the ford motor though.”  The coupe was purchased just up the road from me in Lake Havasu.

 

 

Love the color!!!

Love the color!!!

Window are tinted just right!!!

Windows are tinted just right!!!

 

Thanks Pete for sharing the pics of your 1970 Coupe, I miss my 1970.

What to share your ride?  Drop me a note at agcarrestoration@cox.net

Thanks for reading.
Tim

1970 Mustang

1970 Mustang

Wrenchin’ Tip – ’70 Mustang Transmission Swap

As I get ready to start the new round of mods for my 1970 Mustang Coupe, I’m reminded of a couple of issues that came up when I was assisting  a fellow Mustang owner doing a trans –  transplant. The first tip is partially dependent on what stage you are in …

73 Mustang 351 Cleveland Tear Down – The Pistons

By | | , , , , , , , , ,
Leave a comment

Moving right along with #ProjectSportsRoof.  I’m pulling the piston in this posting.

A couple of things to note.  I record these days before I actually get to post them (in case you can’t tell) and many times the entire days work is broken up into multiple posts.  So you might hear similar comments in new posts, that I’ve already corrected in the previous one.  For example, it might seem I’m obsession over the oil situation, “There’s lot of oil….blah…blah…blah.” Of course that’s true at that point and time, but as the Cleveland came a part – it’s clear that great lubrication wasn’t always the case, barring foreign matter getting in the engine – given damage seen thus far it would have been a pile of sand dumped in the block.

There’s also the fact that there are indications that the engine might have been apart previously (not just the heads).  Maybe a ring job.  I just can’t tell for sure.  What I can tell is that at least the piston rods are original Ford equipment if not original to this engine, as they have the Ford Oval and are coded D0AEA – D0 = 1970.  It’s not a stretch that think that Ford used piston rods from 1970 in a 1972 engine.  Take a look and see what you think:

 

pistonMark-5

BS9 Markings on piston rod.

pistonMark-2

D0AEA markings on the piston rod. D0 = 1970

pistonMark-3

“F” is one of the markings along with an “S” in a shield.

pistonMark-4

Marking “1”

Now I pulled out the right side first (pistons 5-8) as it as the side I happened to have the engine turned over on.   Take a look:

 

 

Although the all of the bearings will be replaced, I do note the ones that aren’t too bad.  This is for documentation and any possible troubleshooting later on.  Here is the removal of the pistons 1-4:


 

So now the pistons are out and we can get a good look at the crank and get pull the cam.

 

Thanks for reading.

Tim

projectsportsroof

collectors cars | Tumblr

The 351 Cleveland is out of #ProjectSportsRoof. Yeah…I know!! It seemed like to took … Welcome back to #ProjectSportsRoof. I’m getting ready to pull the 351C …
1973 Mustang – Project SportsRoof – Compression, Rods and Heads

Thanks for check in on #ProjectSportsRoof. If you remember a of couple months back, shortly after bringing the ’73 Mustang home, I conducted a compression test on all the cylinders.  The 351C was running rough (to put it mildly) and smoked like a pile of tires on fire (only the smoke …
collectors cars | Tumblr

The 351 Cleveland is out of #ProjectSportsRoof. Yeah…I know!! It seemed like to took … Welcome back to #ProjectSportsRoof. I’m getting ready to pull the 351C …

73 Mustang 351 Cleveland Tear Down Video 7 – Mains and Pistons Part 2

By | | , , , , , , , , , , ,
Leave a comment

Welcome back.  This post will show you the removal main bearings for the crank for 351 Cleveland.

You’ll notice that I’ve added some captions correcting some of my theories like there’s seems to be plenty of oil getting around the bearing and the crank.  Of course because it’s happening now, or was happening just before removing the engine that doesn’t mean it’s ‘always’ had oil flowing properly.  Take a good look at the bearing when I remove them and see what you think.

 


I’m going to guess that prior to having the heads being done, based I what I see on the mains, there was some oil issue, rather major oil issues. You recall the valve issue on the #2 cylinder?

Oh!!!!

Oh!!!!

In the next two posts I’ll be removing and taking a look at the pistons and then we’ll inspect the crank, so keep an eye out for those.

Thanks for reading and remember drop me a note.

Tim

HoodPrimer-14

351C Removal and tear down – YouTube

Jul 19, 2016 … Welcome back to #ProjectSportsRoof. This the beginning of rebuild of the 351 Cleveland for the 73 Mustang.

73 Mustang 351 Cleveland Rebuild – Removal 4 – YouTube

Aug 1, 2016 … I’m So close to getting #ProjectSportsRoof engine pulled and starting the tear down.

vintage mustangs | Tumblr

The 351 Cleveland is out of #ProjectSportsRoof. Yeah…I know!! It seemed like to took forever!!! Seems longer since I have driven it in months. Now if you missed …

73 Mustang 351 Cleveland Tear Down Video 6 – Mains and Pistons Part 1

By | | , , , , , , , , ,
4 Comments

We are getting to the good stuff.  We’ll be looking at the bearings, piston, crank and cam in the next few posts.  I’ll be able to determine what was causing the knocking in the bottom end  and  if the 351 Cleveland in #ProjectSportsRoof is going to make it.

So I’m starting with removing the mains.  Now I started early to avoid the heat here in Southern AZ.  Doing so I had to also be a bit considerate of my neighbors. So the garage door is closed as the compressor is loud – and there’s just no good way to loosen the mains while on a stand without an impact wrench or air ratchet.  So I loosened up all the bolts on the mains and fatefully the first set of bolt on piston rod (just to see if I needed the impact wrench).

 

There’s a few of things to keep in mind with contradict a few of my comments during the next few videos. First it seems that the bottom end of the Cleveland has never been apart. The piston rods are original Ford part with the Ford logo and Ford date code (in this case the rod are all “D0” indicated 1970 – which is not a stretch to find them in a 1972 engine) and I’m assuming the piston themselves are as well.  Second is the fact that I haven’t torn an engine apart since in over 35 years so I’m not an expert.  Third, I mention that there appears to have been ample oil flow at the time of tear down, but that might not have always been the case (like when the valve was not operating) – you’ll see the relevance of that qualification coming up.

Coming up in the next post is a good look at the main bearings.

Thanks for reading and drop me your comments and thoughts.  Love to hear from you.

Tim

20160722_165829

Mains and Crank

1973 Mustang 351 Cleveland Tear Down Part 1

Aug 13, 2016 … Welcome back to the 1973 Mustang project dubbed: #ProjectSportsRoof. We have the 351 Cleveland out and now I’m going to begin …

Auto Factoids for Week of 8/21/2016 – Oldsmobile, Broadway, Caddies and Rolls

By | | , , , , , ,
2 Comments

Here are your Auto Factoids for the last full week in Aug 2016.

On Aug. 21st back in 1897 Oldsmobile incorporated to form Oldsmobile Motor Vehicle Co.

1897 Oldsmobile

1897 Oldsmobile

 

Taking a trip back in time to 1921 and NYC’s Broadway and the first play about cars opened – “Six Cylinder Love”.

– Produced by Sam H. Harris  and held on Broadway in the Sam H. Harris  Theater.

– It was a 3 act comedy and had 344 performances from Aug 25, 1921 to July 1922.

– In 1923 it was adapted to the big screen – albeit silent and again in 1931 with Spencer Tracy!!

Six Cylinder Love (1931)

Six Cylinder Love (1931)

 

Happy Birthday Charles Rolls – (the Rolls part of Rolls Royce).  He was born Aug 27, 1877 in London, England.

The two-cylinder Royce 10 - Born 1904

The two-cylinder Royce 10 – Born 1904

Check out this great site on Rolls Royce https://www.rolls-roycemotorcars.com/en-GB/the-rolls-royce-story/the-history-of-rolls-royce.html

Jump forward 25 years and Cadillac became a company on the same day in 1902.

This Runnabout is top of the line Caddy back in 1902.

This Runabout is top of the line Caddy back in 1902.

 

Thanks for reading #AutoFactoids.

Tim

Auto Factoids for the Week of 2/1/2015 – Kaiser Week

Here are your Auto Factoids (#AutoFactoids) for the first week in Feb. 2015!!! I think we can call this Kaiser Week as 3 of our factoid are related to the Kaiser auto manufacturing. In fact the month starts right off with Kaiser factoid. Feb 1, 1947 – Graham-Paige sold out to Kaiser. …

Auto Factoids for the Week of 3/29/2015

Here are your Auto Factoids (#AutoFactoids) to finish out March and kick off April 2015.   March 29, 1980 – Audi introduced their all wheel drive 1980 Quattro – Not a bad-looking car at that!!! Here are some specs for the Quattro: Engine     2.1 L I5 SOHC 10v Transmission     5-speed manual Dimensions Wheelbase     99.4 …

Auto Factoids for the Week of 4/19/15

Here are your Auto Factoids (#AutoFactoids) for last full week of April 2015. April 22, 1954 – Nash and Hudson merge to from AMC When does this: Nash Rambler PLUS THIS: ’53 Hudson Hornet EQUAL THIS?  : Javlin Well that’s the equation formed when Nash merged with Hudson and produced AMC.   AMC (American Motor Corp) …

 

 

73 Mustang 351 Cleveland Tear Down Video 5 – Oil Pan and Crank First Look

By | | , , , , , , , , , , ,
2 Comments

Thanks checking back in with the 1973 Mustang (#ProjectSportsRoof).

I’m moving right along with getting the progress on the 351C tear down posted up.  In this post I’ve pulled the oil pan and we can take a quick look at the crank and mains.

You have to love Ford engineers. Each main is numbered with an arrow…come on…that’s cool!


I was hoping that there would be something obviously out of whack at this point, but everything looked O.K. from what I could see.

Coming up next I’ll unbolt the mains and we’ll look at the bearing, piston and crank.

Thanks for reading.

Tim

HoodPrimer-14

73 Mustang 351 Cleveland Rebuild – Removal Part 3

Jul 31, 2016 … We are moving right along on #ProjectSportsRoof,with the 351 Cleveland rebuilt. Still getting it ready to be pulled from the engine bay In this …

Average Guy’s Car Restorations, Mods, and Racing

Source: average-guys-car-restoration-mods-racing.com projectsportsroof … for the 73 Mustang, #ProjectSportsRoof, I’m about to remove the intake manifold.

1973 Mustang 351 Cleveland Tear Down Part 1

Aug 13, 2016 … Welcome back to the 1973 Mustang project dubbed: #ProjectSportsRoof. We have the 351 Cleveland out and now I’m going to begin …

1973 Mustang 351 Cleveland Tear Down Part 3

By | | , , , , , , , , ,
Leave a comment

Thanks for checking back in on the progress on the 1973 Mustang SportsRoof’s 351C tear down.

In the last post I still needed to remove the lifters and the right side head.  To remove the remain head, you have to remove the rockers to get a socket on them.

Also took the time to recheck the push rods, with all the noise coming from the bottom end of the block, you can’t be too careful.

I’ll apologize now for a couple of things.  First the fan noise.  It’s pretty hot here this time of year in southern Arizona and that fan makes it bearable, barley.  But even worse is the compressor noise, so don’t crank up the volume too much.  And finally, if you notice, the captions are a bit higher on the video.  I’m trying to hide the brand name of my BVDs.  Last time readers got a glimpse of the brand, they started sending me their brands to wear on the next video.

 


 As you could see at the end of the video, the cylinder aren’t horrible but not great.  But we’ll look at them a bit closer coming up.

Thanks for checking on #ProjectSportsRoof.

Tim

1973 Mustang 351 Cleveland Tear Down Part 1

6 days ago … Welcome back to the 1973 Mustang project dubbed: #ProjectSportsRoof. We have the 351 Cleveland out and now I’m going to begin …

1973 Mustang 351 Cleveland Tear Down Part 2

By | | , , , , , , , , ,
1 Comment

Moving along with 351 Cleveland rebuild for the 73 Mustang, #ProjectSportsRoof, I’m about to remove the intake manifold.

You’ve seen this 351C with its breathing apparatus removed. That was back when it bent a rod and the valve burnt.

Rods

Bent Rod.

Oh!!!!

Oh!!!!

That was why I had the heads rebuild.  As a refresher, this tear down is a result of discovering the a bottom end knock after the heads were replaced.

So here is the video for the intake manifold removal.

 


 Thanks for reading.

More coming up on the 351 Cleveland tear down

Tim

#ProjectSportsRoof

 

1973 Mustang 351 Cleveland Tear Down Part 1

By | | , , , , , , , , , ,
Leave a comment

Finally the fun part begins.  Well actually it’s all fun, just varying degrees of it.   Welcome back to the 1973 Mustang project dubbed:  #ProjectSportsRoof.   We have the 351 Cleveland out and now I’m going to begin disassembly and see if we can get to the bottom of the “bottom end noise” it developed.

Here’s the first video.  Don’t be distracted by the Corvette t-shirt from my corvette club, it’s ok to own both!!

 

Here’s a look at one of nuts from the torque stall converter:

They are pretty rounded.

They are pretty rounded.

As you can see I didn’t have you watch as I unbolted the fuel pump or the brackets, even though this is Average Guy’s Car Restoration which equates to average skill set, average tool hoard  and average (or below) budget, but I’m thinking you get the removal of a couple of bolts.  If things get tricky (for me) I’ll cover it.

Next up we get the intake manifold off and heads.

Thanks for check back.

Tim

 

351C finally on the stand!

Classic Cars / Car Projects / Car Shows – Your Car/Truck Projects …

Welcome back to #ProjectSportsRoof. With the floor pans welding, sealing and coating finished the next step was to apply the heat and sound barrier. This is …
restorable classic cars | Tumblr

Welcome back to #ProjectSportsRoof. I’m getting ready to pull the 351C from between the fenders of the 1973 Mustang SportsRoof for a complete rebuild.

73 Mustang 351 Cleveland Rebuild – Engine is Out!!!

By | | , , , , , , , , ,
4 Comments

Time to celebrate!!!   The 351 Cleveland is out of #ProjectSportsRoof.

Yeah…I know!! It seemed like to took forever!!!  Seems longer since I haven’t driven it in months.

Now if you missed the last post and you are expecting to see a video of the engine coming out, that’s just not going to happen.  Here’s a recap of just why there’s no video.

I had made arrangements with my neighbor Dan (Dan did the welding on the floor panels for me) for a Friday he had off to pull the engine.  I was going to “work” from home that day and we’d carry out the task in the morning – it’s pretty hot here in Southern Arizona this time of year.  Well, I had an issue at work and I had to run in for what I hoped would be only a few minutes – it took until noon.

By then, it was over 100 degrees and when I pulled into my driveway Dan was outside working on one of his projects.  After apologizing  I changed in to some grubby clothes real quick and we got to work.  By then it was about 106 degrees out and of course we are doing this outside.  We should have been done by  time we actually started and Dan’s adorable twins we hoping to make it the pool before their Dad had to head off to work for the evening.

I mention this all because I’m setting up you for the disappointment, (there is nothing more exciting than getting the engine out – well maybe putting a new one in, it’s a milestone worth capturing on video).  Given the above circumstances, I felt it very unfair to ask Dan and the twins to hang out while I stopped to talk you all and then perform a task and then record.  So I have no shots or video of pulling the engine out.

351C finally on the stand!

351C finally on the stand!

It was an effort but here it is:

And there you have it.  #ProjectSportsRoof gave up its 351c power plant and boy does it need an overhaul!!

So keep checking back here (www.agcarrestoration.com) and watch it all unfold!

Thanks for read and drop me a note, love hearing back from readers.

Tim

1973 Mustang SportsRoof

1973 Mustang SportsRoof

projectsportsroof

Average Guy’s Car Restorations, Mods, and Racing

http://wp.me/p2YxYx-4V. Tagged: projectsportsroof … We are moving right along on #ProjectSportsRoof,with the 351 Cleveland rebuilt. Still getting it ready to be …

73 Mustang 351 Cleveland Rebuild – Removal Part 3

Jul 31, 2016 … We are moving right along on #ProjectSportsRoof,with the 351 Cleveland rebuilt. Still getting it ready to be pulled from the engine bay In this …

restorable classic cars | Tumblr

Welcome back to #ProjectSportsRoof. I’m getting ready to pull the 351C from between the fenders of the 1973 Mustang SportsRoof for a complete rebuild.

73 Mustang 351 Cleveland Rebuild – Removal Part 5

2 days ago … Tagged: projectsportsroof … We are moving right along on #ProjectSportsRoof, with the 351 Cleveland rebuilt. Still getting it ready to be …