1973 Mustang Heater Box Part 2

I’m finishing the labeling of the components for the heater box before I pull it out.  These videos help with replacing any “left over” parts and memory joggers.

Unfortunately I did discover an area of rust and that is never a good thing!!!

Take a look:

 

 

Coming up next the box comes out and we take a good look at it.

Thanks for reading.

Tim

newprimedhood

classic ford mustang | Tumblr

Thanks checking back in with the 1973 Mustang (#ProjectSportsRoof). I’m moving right along with getting the progress on the 351C tear down posted up.
73 Mustang 351C is Out – YouTube

Aug 9, 2016 Finally #ProjectSportsRoof gives up it engine. Thanks to my neighbor Dan Thomas for helping me getting this out.
Classic Cars / Car Projects / Car Shows – Your Car/Truck Projects …

Welcome back to #ProjectSportsRoof. With the floor pans welding, sealing and coating finished the next step was to apply the heat and sound barrier. This is …

Check this Out! Renault uncovers the stunning Trezor concept in Paris

Awesome concept car!!!

The Renault Trezor's single-piece roof lifts for entry and exit

The Renault Trezor’s single-piece roof lifts for entry and exit(Credit: Scott Collie/New Atlas)

The Volkswagen I.D. concept may be as important as the Beetle (according to Volkswagen, anyway), but it’s not the prettiest all-electric concept car in Paris, not by a long shot. A real contender for that title is the Renault Trezor, a gloriously curvy, 350-hp grand tourer with clamshell roof, Formula E-based powertrain and “Multi-Sense” autonomous technologies. If this is what the future looks like, we can’t wait to go there.

The Trezor picks up where Renault left off with the passion-red 2010 DeZir concept in terms of swoopy, show-stopping design. Renault says that in the same way the DeZir influenced the styling elements of future products, like the 2012-introduced Clio and 2015 Kadjar, the Trezor will inform the shape of things to come.

And that’s great news because the Trezor is easily one of the sexiest cars on display in one of the world’s sexiest cities, a city that’s currently playing host to both the 2016 Mondial de L’Automobile and Fashion Week. The Trezor would feel comfortable at either.

As we reported way back in 2010, the DeZir was inspired by “falling in love.” It’s been five years, that love is running deeper than ever and now blossoms into “maturity and commitment” in the Trezor. In other words, the DeZir was red-hot lust embodied, and the Trezor is a stronger, committed relationship (that clearly hasn’t lost a step in the sex and passion departments). It’s all very fitting for a Paris debut.

Like the DeZir, the Trezor is defined by voluptuous front and rear fenders, which come across more smooth and sensual than muscular. The new concept stretches out more dramatically than the DeZir, its long, flowing hood teaming with a roofline that slowly descends to the rear bulge between the fenders.

Renault Trezor

Though still a two-seater, the new, 185-in (4,700 mm) concept is more than a foot and a half (475 mm) longer than its 2010 predecessor and sits on a wheelbase with an extra 7.6 in (194 mm). The 80.6-in (2,048 mm) front and 83-in (2,106 mm) rear tracks work with that wheelbase to grab hold of the road with the custom Continental tires.

Up front, the Trezor is defined by the cavernous side intakes dropping down from the sharp headlamps and the curved indentation created with help from the chin down below. The rear-end design includes a fiber optic lighting fixture with integrated laser light. “Under braking, the torsion and stacking of the optical fibers creates an interesting visual effect and increases the intensity of the light,” Renault syas of the design.

Renault Trezor at the 2016 Paris Motor Show

The low-stance carbon fiber bodywork delivers a slippery drag coefficient of 0.22 and helps keep weight to 3,527-lb (1,600-kg) in conjunction with the carbon monocoque.

The Trezor gives off a first impression of being a full-blown supercar, and word of an F1-influenced powertrain temporarily supports that idea. The electric engine is more modest in output, though, a rear-mounted 349-hp unit derived from the same technology that drove the Renault e.dams car to two Formula E championships. Its 280 lb-ft (380 Nm) of torque help it fire to 62 mph (100 km/h) in four seconds flat.

Renault Trezor

Individual front and rear battery packs help keep the motor spinning and weight distributed evenly. A Formula E-derived energy recovery braking system helps to extend time between mandatory recharges. In place of the usual fuel filler door on a gas vehicle, Renault has an analog battery level indicator, a refreshingly simple alternative to the ubiquitous smartphone app with systems info.

The Trezor looks like the type of sporting GT that you’d look forward to driving from point to point (and points beyond), but it does include Multi-Sense autonomous mode, along with neutral and sport modes. The steering wheel doesn’t tuck away, like in the VW I.D. and other concepts, instead widening out to open up a better view of the dashboard. The newest front passenger can use the digital dash for watching video content, playing games or doing all those other things one would do on any digital display. The exterior lighting pattern changes in autonomous mode as a signal to other road users.

Before driver and passenger start kicking back and watching video content on the dash display, they need to saddle up into the cabin through the lifting single-piece roof/hood. With no doors to open, the driver and passenger straddle the leather-wrapped sides to get in, a throwback to classic race cars. Inside, Renault takes the bucket seat to a new level with its full-wrapping driver and passenger pockets trimmed in warm, supple red leather.

Renault Trezor interior

The wooden dashboard was designed in conjunction with French wooden bicycle company KEIM Cycles, its specially prepared ash wood structure supporting the large L-shaped central OLED UHD touch display and control center and digital instrument panel. The multimedia system automatically recognizes the driver’s smartphone, and apps are exported to the vehicle display for him or her to organize and use as desired.

The red wood of the dashboard extends forward under the hood, wrapping a pair of custom suitcases snugly. Leather straps hold that luggage in place.

The Trezor makes its world debut at the 2016 Paris Motor Show, which opened to the press on Thursday. We pretty much gave up any sliver of hope of production the minute we saw it, but Renault does say the car “previews trends likely to be seen in future Renault models.” So there’s that.

Take a look at the Trezor in action below:


SOURCE: http://newatlas.com/renault-trezor-concept/45688/

Thanks for reading.
Tim

Renault Trezor Concept Official Photos and Info – News – Car and …

The Renault Trezor is an old-fashioned dream car. Read more and see pictures at Car and Driver.
Renault Trezor concept: the EV is the car we prey gets made | British …

2 days ago Renault Trezor concept: Thought EVs were boring? You were half right, but you’ll be completely wrong if this goes into production.

1973 Mustang Heater Box Part 1

Maybe one of the worse task to tackle on a car is the heater core.  In particular on some older cars.  In most cases you have to remove the entire dash.   I know this because when the heater core sprung a leak in my 1974 Cobra Jet Torino, I didn’t have the time to fix it.  I took it to a shop and the cost was hefty.

Since I’m doing a lot more of my own work on #ProjectSportRoof and I’m going to dive in and replace the heater core and like the Torino it is an A/C car.

Now the goal is to attempt to remove the box without taking the entire dash out – that is a huge time sync and it leads down the road of ” since I have it out, I might as well  fix…”.

I refer to the heater box as the portion to the right of the blower, there are some references that include the blower as well.  There are only 3 bolts holding the heater box in place, two are behind the unit and poke through the firewall and one is in the front.  I’m hoping the rest is just getting it in the right angle to pull it out.

I don’t have a camera guy only a small tri-pod  that I can set in limited flat spots and record what I can.

HINT:   Remove the passenger seat, it sure does help.

Here we go:

 

Coming up we’ll take a close look at the box, access what needs to be done.

Thanks for reading.

Tim

newprimedhood

 

73 Mustang 351 Cleveland Tear Down Video 7 – Mains and Pistons …

Aug 25, 2016 Welcome back to #ProjectSportsRoof. This the beginning of rebuild of the 351 Cleveland for the 73 Mustang. 73 Mustang 351 Cleveland …
Average Guy’s Car Restorations, Mods, and Racing

Tagged: ProjectSportsRoof. Source: … Tagged: ProjectSportsRoof · 22nd September 2016 … Thanks for continuing to follow #ProjectSportsRoof. The 351 …
collectors cars | Tumblr

The 351 Cleveland is out of #ProjectSportsRoof. Yeah…I know!! It seemed like to took … Welcome back to #ProjectSportsRoof. I’m getting ready to pull the 351C …
73 Mustang 351 Cleveland Rebuild – Removal 2 – YouTube

Jul 27, 2016 Prepping the engine and engine bay for removing #ProjectSportsRoof power plant.

projectsportsroof

 

 

 

1973 Mustang Gets a Breathing Upgrade – Edelbrock 2750 Performer LB 351-2v

With all the engine work being done it would be a shame to plop that big old iron intake back on top of all that work.

So after some research I selected Edelbrock’s 2750, an intake designed for the V2 351C engine, and set up for a 4bbl carb.

img_20160921_144733226_hdr

img_20160921_144759435_hdr

Ports

 

img_20160921_145018641_top

The weight difference is amazing!!!

Here are the details:
Edelbrock 2750 Performer 351-2V Cleveland Intake Manifold
Part Number: 350-2750
4-bbl Square-Bore Carb Flange (non-EGR)
Idle-5500 rpm

Now I have to pick a carburetor for #ProjectSportsRoof.

What would you use?

Thanks for reading.

Tim

1973 Mustang – Project SportsRoof – Compression, Rods and Heads

Thanks for check in on #ProjectSportsRoof. If you remember a of couple months back, shortly after bringing the ’73 Mustang home, I conducted a compression test on all the cylinders.  The 351C was running rough (to put it mildly) and smoked like a pile of tires on fire (only the smoke …

73 Mustang 351 Cleveland Tear Down Video 7 – Mains and Pistons …

Aug 25, 2016 Welcome back to #ProjectSportsRoof. This the beginning of rebuild of the 351 Cleveland for the 73 Mustang. 73 Mustang 351 Cleveland …

Average Guy’s Car Restorations, Mods, and Racing

Thanks for continuing to follow #ProjectSportsRoof. The 351 Cleveland has been torn down and you’ve seen the major components and their deplorable …

73 Mustang 351C Rebuild – Tear Down’s Final Conclusion

1 day ago Thanks for continuing to follow #ProjectSportsRoof. The 351 Cleveland has been torn down and you’ve seen the major components and their …

 

73 Mustang 351C Rebuild – Tear Down’s Final Conclusion

Thanks for continuing to follow #ProjectSportsRoof.   The 351 Cleveland has been torn down and you’ve seen the major components and their deplorable condition and it is time now to get it to the machine shop.

It’s not easy finding a good shop.  While I was hunting around for a machinist I asked a few car guys I know for suggestions and found the two that were recommended were out of business.  That is not uncommon.  It is often times more expedient to just drop in a crate  or re-manufactured engine (long or short block) and that’s tough to compete against.  I was concerned that I’d have to transport the 351C block 100 miles away to check get the work done.

While I was searching for a shop, I was simultaneously search for a re-man’ed long or short block.  Of course I was specifically looking for a closely date code 351C and I was told that those blocks are not plentiful.   I took my local search to the hot rod shops (by hot rod shops I mean, shops that sell hot rod parts) in town and the shop I chose was recommended by several.  I double checked the review that were available and these guys have a very good rep.  I’m going to withhold the name until I get the block back.

 

 


 Luckily I had the block still bolted to the engine stand.  That and my cat-like reflexes (HA) kept a disaster from occurring.

Hoisted!!!

Hoisted!!!                                                                                                                                                                    ^^^ lots of Mustang parts

Not withstanding my attempts to bounce the block off the garage floor it is finally suspended and ready to get loaded.

Tied Down

Tied Down – This is the fastest this engine has done in months!!!

 

Upon arrival at the machine shop two guys unloaded the block and I asked them to measure the current bore and the size of the crank.

The results were as follows:

The stock bore is 4″ and the measurements of the current bore is .030  under making the bore 4.030.   You’ve seen the condition of the cylinders and the shop recommended to take another .010 off making the proposed bore 4.040″.

Now the crank was measured as well and it was .010 machined from stock thickness.  Purposed is to take it down another .010 to .020 under.

The shop recommended to replace the cam, so that will happen.

This ended the speculation about the originality of the engine.  Clearly this was rebuilt at least once.

Now decisions need to be made.  But first let’s take stock of where we are and then play a little “What If”, shall we?

Using this standard formula for determining displacement:  Bore2 X Stroke X 0.7854 X Cylinders  (laid out below from a spreadsheet)

Bore X Bore  X Stroke X 0.7854 X Cylinders = Displacement
Stock 4 4 3.5 0.7854 8 351.8592
Current 4.03 4.03 3.5 0.7854 8 357.1568801
Proposed 4.04 4.04 3.5 0.7854 8 358.9315699

Just cleaning up the cylinders will move  the displacement  from 351 (stock) to 358 as proposed.  That is currently where we are.

Now let’s play What If!!!  What if I increased the bore a bit more?  Here is what that look like in displacement terms.

Taking up the bore one more .010 to 4.05″  looks like this.

Bore X Bore  X Stroke X 0.7854 X Cylinders = Displacement
Option 4.05 4.05 3.5 0.7854 8 360.710658

4.05 is the furthest  I want to do with the bore – if it’s possible.  I know one Mustang owner that has his bore 4.06″, however, I’m not comfortable with that. So we’ve increased the displacement 360.

Now let’s work on the stroke.  The machining of the crank will net little to no change in the displacement. To increase that I’d have to go with a different crank.  So what do those number look like?  Leaving the bore at 4.04 and increase the stroke yields the following increases:

Bore             x                  Bore                      x             Stroke                    x                   0.7854                    x        #Cylinders                                            Displacement

Option 4.04 4.04 3.75 0.7854 8 384.5695392
Option 4.04 4.04 4 0.7854 8 410.2075085 Basically the 400

Let’s go a bit further with the increase in bore:

Bore             x                  Bore                      x             Stroke                    x                   0.7854                    x        #Cylinders                                            Displacement

Option 4.05 4.05 3.75 0.7854 8 386.475705
Option 4.05 4.05 4 0.7854 8 412.240752
Option 4.05 4.05 3.85 0.7854 8 396.7817238 Off the shelf long stroke cranks
Option 4.04 4.04 3.85 0.7854 8 394.8247269 Off the shelf long stroke cranks

Care to share your thoughts on the build?   Drop me a note!!!

Thanks for reading.

Tim

HoodPrimer-14

 

projectsportsroof

73 Mustang 351 Cleveland Tear Down Video 7 – Mains and Pistons …

Aug 25, 2016 Welcome back to #ProjectSportsRoof. This the beginning of rebuild of the 351 Cleveland for the 73 Mustang. 73 Mustang 351 Cleveland …
collectors cars | Tumblr

The 351 Cleveland is out of #ProjectSportsRoof. Yeah…I know!! It seemed like to took … Welcome back to #ProjectSportsRoof. I’m getting ready to pull the 351C …
classic ford mustang | Tumblr

Thanks checking back in with the 1973 Mustang (#ProjectSportsRoof). I’m moving right along with getting the progress on the 351C tear down posted up.

73 Mustang 351 Cleveland Tear-Down – Cylinder Inspection

Well we are finally at the next to last post for the tear down of my 1973 Mustang SportsRoof  351 Cleveland.  Everything has been removed and we can not get a look at the last piece of  the puzzle in figuring out what needs to be done to make this thing run again.

Take a look at the cylinders.

 

 

All the indications are that this engine was oil starved at some point. I’m sure it was a result of the valve supporting the #2 cylinder being fired shut, but that is still just a guess.

If you look back at earlier posts, I waffled between guessing if this Cleveland had been apart and worked on.  Well by the sight of the cross-hatching it’s clear that the cylinders have been worked before and I’m guessing the rings are well.

Next the block, crank and cam are headed off to a machine shop and things become very clear after the experts look at this 351C.

 

Thanks for reading.

Tim

HoodPrimer-14

 

projectsportsroof

73 Mustang 351 Cleveland Tear Down Video 7 – Mains and Pistons …

Aug 25, 2016 Welcome back to #ProjectSportsRoof. This the beginning of rebuild of the 351 Cleveland for the 73 Mustang. 73 Mustang 351 Cleveland …

collectors cars | Tumblr

The 351 Cleveland is out of #ProjectSportsRoof. Yeah…I know!! It seemed like to took … Welcome back to #ProjectSportsRoof. I’m getting ready to pull the 351C …

vintage mustangs | Tumblr

Thanks checking back in with the 1973 Mustang (#ProjectSportsRoof). … the knocking in the bottom end and if the 351 Cleveland in #ProjectSportsRoof is going …

 

73 Mustang 351 Cleveland Tear Down – Crank and Cam Removal/Inspection

Welcome  to #ProjectSportsRoof and the seeming never ending processing of tearing down the 351C.  We are in the final stages and I wanted to show you the crank and cam condition.  I put together the video below.


 As you can see the crank is not in great shape and the cam is a bit worn.  The crank is going to have to be turned and the cam might be beyond polishing.

Leaving the flange on was a time set back as I had to stabilize the engine with the hoist so that I could unbolt it from the engine stand.  I had intended to drop it on an engine cradle but I hadn’t even un-boxed it yet so I removed the flange and the flex plate and bolted it back on the engine stand.

It’s now clear that the engine had severe oil starvation at some point and this caused all the damage – ring wear in the cylinders (you’ll see that coming up), severe wear crank and main bearings.

It just about time to get this block off to the machine shop.  I’m going to have them do some measurements for me and help decide what needs to be done to save this engine.

I have a couple more posts for the tear down and those are coming up.

Thanks for reading.

Tim

HoodPrimer-14

projectsportsroof

73 Mustang 351 Cleveland Tear Down Video 7 – Mains and Pistons …

Aug 25, 2016 Welcome back to #ProjectSportsRoof. This the beginning of rebuild of the 351 Cleveland for the 73 Mustang. 73 Mustang 351 Cleveland …
collectors cars | Tumblr

The 351 Cleveland is out of #ProjectSportsRoof. Yeah…I know!! It seemed like to took … Welcome back to #ProjectSportsRoof. I’m getting ready to pull the 351C …
Great American Muscle Cars – muscle cars – Community – Google+

Welcome back to #ProjectSportsRoof. With the floor pans welding, sealing and coating finished the next step was to apply the heat and sound barrier. This is …

 

Parking Lot Spotlight – 1967 Pontiac Bonneville!!

I haven’t written a Parking Lot Spotlight (#ParkingLotSpotlight) in a while, but this beautiful Bonneville was worth breaking the dry spell for.

Spotted this beauty just today as I had to run back to the grocery store because there are days, although armed with a list, things just don’t make in the shopping cart.  This particular return trip paid off.

The ’67 Pontiac lineup these days are pretty much dominated, at least in the collector world, by the Firebird, GTO, Tempest, LaMans, Gran Prix but I love the other two door offerings you could find in the showrooms.   These include some awesome cars with long, low lines, roomy interiors and massive trunks.  They came in hard and soft tops as well.  Some of those sported model names like Executive series which in NO-WAY looked like a stuffy exec car.  These were muscular and sporting.  Cars like the  Catalina 2+2 with (eight lug wheels) and the Pontiac Executive are exceptional looking cars and powered with V8s and 4bbl carbs.

I have always coveted the Bonneville models of the mid-1960, they remind me of my first car, 1966 Impala.  Same long lines  and big interiors and I loved the dash and instrument setup.

So check out this beauty:

Great looking paint - not original but beautiful

Great looking paint – not original but beautiful

1967PontiacBonne-2

These are the lines I’m talking about. Long and low….AWESOME.

1967PontiacBonne-7

HUGE trunk!!! Love those inset taillights and how the bumper is incorporated into the design of the rear end.

1967PontiacBonne-8

Long and sleek belt lines and the white-painted top does this car justice!!

1967PontiacBonne-9

Over/Under headlights with the bottom set incorporated in to a beautiful distinctive chrome bumper.  (One drawback of having to manage a good pic in a crowded parking lot – I couldn’t get the perfect front end shot.)

That year the Bonneville came in a 2 door hard top like this beauty as well as 4 door sedan, 2 door convertible and even a station wagon.   Engines available were the 230 CID in various configurations as well as the 326 CID and the 400 CID engine and the 428 CID  all as options.  Sychromesh or Turbo-Hydromatic transmission were available.  There were 96,708 passenger Bonnevilles produced.  Of interest was that 483 Bonnevilles were sold to car converters and at least one of those turned up as the car that the fictitious (at the time) band the “Monkees” tooled around on the television show of the same name.  Oh, you might have heard of the guy that bought at least one of the Bonnevilles and turned it into the this cool car – George Barris!!

MonkeeMobile

MonkeeMobile

According to the for sales sign this Bonneville is powered by the 400 CID topped with a 4bbl carb which would put this between 333 HP and 350 HP.  The transmission is the 400 Turbo-Hydromatic.

I love the interior  of this factory air car!!!

1967PontiacBonne-4

Love the linear gauges!! Is that a factory 8 Track!?!?!!! Come on that is SO COOL!!!!  Options list I found doesn’t show this as an option.

1967PontiacBonne-6

Cloth seats and look at all the room!!! Love the large center speaker and it has the front bench seats with the pull down arm rest. It looks as it should!!!

 

Of course I’m at the grocery store and no time to hang around and wait for the owner to show up.

As a side note I don’t know this car nor the owner.

Thanks for reading.

Tim

I don't really need a Lambo....but.....

 

Auto Factoids for the Week of Aug. 28, 2016 – Goodyear, Porsche

Here are your Auto Factoid for this last week of August 2016.

 

Aug 29 1898  Goodyear Tire & Rubber incorporated – With a capital stock of $100,000 and 13 employees, they began November 21, 1898, with a product line of bicycle and carriage tires, horseshoe pads, and poker chips.

First Goodyear Factory

First Goodyear Factory

 

Aug 29 1876 Charles Kettering Born Dayton, Ohio 1876 – Kettering founded Dayton Engineering Laboratories Company (Delco) (which started in a barn) and later became head of research for GM (1920-1947)

Dayton Engineering Laboratories Company, or Delco.

Dayton Engineering Laboratories Company, or Delco.

 

Sept 2 1893  Frank Duryea car driven  – it wasn’t much just the typical ‘run-a-bout’ and I think kudos goes to Frank’s brother Charles as well 

1994 Duryea

1994 Duryea

Sept 3 1895  Duryea Motor Co.  incorporates –  Almost two years to the very day of the first drive, Duryea Motor Co. becomes a reality.  They produced some beautiful cars like:

This is the Model C Touring car. Production continued until 1927.

This is the Model C Touring car. Production continued until 1927.

Sept 3 1875 Ferdinand Porsche born  Mafferdorf, Bohemia – You may have heard of Freddy (as his Mom called him) Porsche, if not you know his cars:

 

Oh..BTW...it's a Hybrid!!

Oh..BTW…it’s a Hybrid!!

1976

1976

 

Thanks for reading.

Tim

Average Guy’s Car Restorations, Mods, and Racing

It was a 3 act comedy and had 344… View On WordPress. Tagged: AutoFactoids Auto HistoryAuto RestorationAutoBlog · 21st August 2016 · Video with 1 note …

They Made How Many? 1916 Automotive Production

Feb 25, 2013 Interesting enough, Kaiser had no automotive business experience. In 1953 the company became… August 2, 2015. In “#AutoFactoids” …