73 Mustang is back!! Project SportsRoof is Alive!

Well this day was long time coming.  My 1973 Mustang has finally returned home and it sounds fantastic!!

You followed #ProjectSporstRoof, you may recall  I ran into time issues and ability, to get the transmission mated back up to the engine and the components had to be placed back under the hood and new radiator installed. I had disassembled the engine, send it out to be bored (.040) and crank was milled a bit and rebuilt. That was over a year and half ago. In Feb of this year I decided to get some help getting it running.

 

 

A relative had an acquaintance that was starting a second shop here in Tucson to match the success of their first shop that was about an hour way. I wanted to keep the car local so I could check in on the work being done. So I asked and received an estimate and the price was fair. My only stipulation was that the car stay in Tucson and not their out-of-town shop. What I didn’t know was that their idea of starting a shop was to use a garage at a start-up/pop-up used car lot. In return they would be doing really cheap work for the car dealer in lieu of paying expensive rent.

There’s very few times such a plan works out and one day my Mustang disappeared and I wasn’t informed. I eventually (weeks) got a hold of them and found that my car was right where it I didn’t want it…at the out-of-town shop.

Now, I understand business deals falling part, especially when you start-up with little capital and hook-up with another start-up with little capital. What I didn’t like was not knowing that my car was now no longer in the city. Checking on the progress was going to be impossible and as it turned our some of my parts were left/lost at the Tucson shop. An additional problem was that I forgotten to pack a few parts and it took massive coordination effort to get the items to them.

 


So lets total this up real quick:
1. Missing car
2. Found car
3. Missing/Miss placed parts
4. Lost parts
5. Long periods of un-returned text and voice messages.
6. Lack of trust.

Number 6 is huge!!!

If you don’t have trust in the shop then everything, even the normal things, that arises when you are restoring a car are suspect. Combine that with a newly rebuild engine, never fired-up, well lets just say I was concerned that the proper cautions would be attended to and I’d end up with a pile of ugly Mustang parts in my driveway that I’d have to get rid of or sell the house to afford to fix it!!! So I held my breath and reluctantly had them push on.

Only two real issues came up, one was the drive shaft, it has been repaired a some point in the car’s history and poorly done at that and the yoke was in rough shape. A local shop said that could fix it for a set price, they couldn’t and ended up replacing the shaft and for the original price quoted. The other issue was a panic call/video from the shop, showing my Mustang vomiting radiator fluid in the air like Hawaii’s Kīlauea. That of course is what happens when you put a Windsor thermostat in a 351 Cleveland.

So I reduced my expectations and told them all I wanted was for the car to be mobile. I wanted it driven off the trailer and driven in my driveway and I’d be finished with them. The manual shifting you saw in the video is a result of a lost part.

Now #ProjectSportsRoof is back and I can get on with all the little projects that are left…like installing the shift linkage…yea…that should be first!!!

 

Thanks for reading and I can now say…there’s more coming up for #ProjectSportsRoof!!!

Tim

1973 Mustang Project SportsRoof – Exterior Walk-Around

Welcome back to #ProjectSportsRoof.  I run my car projects much like I run my IT projects.  You always have to know where to start and know the end game.   As with any project that isn’t being built from scratch, in other word, you have to work with what you’ve got, …
1973 Mustang – Engine Bay Work

If you look back at #ProjectSportsRoof post you’ll see the condition engine bay.  During those videos I mentioned that I was going to clean it up and hit it with a rattle can.  Again this isn’t going to be a concours restoration, it’s going to look nice and it’s going …
1973 Mustang – Project Sports Roof

As I posted before, after a vigorous (not read ‘desperate’) I finally found my next personal project.  The 1973 Mustang Sports Roof  Fastback is what I settled on.  Now we start the project that has been dubbed #ProjectSportsRoof (yes I find it necessary to use the ‘hash’). 1973 Mustang Color …
1973 Mustang – Project Sports Roof – Pertronix Ignitor Update

Well win some and you lose some.  If you’ve seen my other posts related the replacement of the points and condenser for the 351C you’ll notice that I gave conversion high marks.  This was all based on the years of use I got out of the conversion I did on …

 

ProjectBeepBeep – 68 Road Runner Valve Cover Gaskets Wrap Up

So you can grab a couple more tips for Valve Cover Gaskets installation and you get to hear BeepBeep running like a top….love that engine music!!!


Some great tips and one more project down for Bill and BeepBeep!!

Coming up next an update and #ProjectSportsRoof and BeepBeep gets tachy (get it?….not Tacky but Tachy!!!)

Thanks for reading.
Tim

 

68 Road Runner Gets it’s Beep Beep back!!

While trying to warn a real life coyote of his ‘rapid’ approach, Bill’s 1968 Road Runner (#ProjectBeepBeep) failed to  issue the famous BeepBeep, or was that just part the car’s instinctive DNA based response to coyotes in general? Either way Bill tackles the problem. Here’s a shot of the horn.   More coming up …

Project BeepBeep – ’68 Road Runner – Drum or Disc – The Decision

1968 Ply Road RunnerProject BeepBeep Welcome back to #ProjectBeepBeep.  Bill is looking at the brakes and gets some professional assistance to help him make a crucial decision.  You know if you’ve got a lot of GO…you need a lot STOP. It not an easy decision to alter a car’s originality, especially …

Project BeepBeep – 68 RoadRunner Dash Update

Welcome back to #ProjectBeepBeep.  Thanks for checking in on the progress of Bill’s 1968 Plymouth Road Runner. If you recall mixed in with some brake updates,  Bill mentioned that he had sent out the circuit board for a restored.  Here is an update on the status of the dash.     Next up an …

ProjectBeepBeep – 68 Road Runner Valve Cover Gaskets Part II

Bill gives some tips on cleaning up the valve covers and tries valve cover studs.


Wrap up of the valve cover gasket replacement is up next.

Thank for reading.

Tim

#ProjectBeepBeep

 

 

68 Road Runner Gets it’s Beep Beep back!!

While trying to warn a real life coyote of his ‘rapid’ approach, Bill’s 1968 Road Runner (#ProjectBeepBeep) failed to issue the famous BeepBeep, or was that just part the car’s instinctive DNA based response to coyotes in general? Either way Bill tackles the problem. Here’s a shot of the horn. More coming up …

Project BeepBeep – 68 RoadRunner – Body Bumpers Kit

Bill takes a look at MOPAR Body Bumper Kit for #ProjectBeepBeep and shows a common mistake made when a car is painted. Bill is correct that the bumper are painted over show an oversight that might just tank the value of your car. I grew up working in my Dad’s body …

 

ProjectBeepBeep – 68 Road Runner Valve Cover Gaskets Part 1

Continue following Bill’s journey to a “Leak Free MOPAR” for his 1968 Road Runner. #ProjectBeepBeep

Wild E. Coyote is back!!!  Apparently he’s been working at Summit Racing!!!!

BeepBeep is getting some new valve cover gaskets!!!!  But will that stop the leaking?!?!?!?!

 




 

More coming up.

Thanks for reading/viewing.

 

Tim

68 Road Runner Gets it’s Beep Beep back!!

While trying to warn a real life coyote of his ‘rapid’ approach, Bill’s 1968 Road Runner (#ProjectBeepBeep) failed to  issue the famous BeepBeep, or was that just part the car’s instinctive DNA based response to coyotes in general? Either way Bill tackles the problem. Here’s a shot of the horn.   More coming up …

Project BeepBeep – ’68 RoadRunner – Door Panel Tips

Ready for some more #ProjectBeepBeep?  Bill takes you through a few tips for restoring your B-Body door panels. Take a look:     Great stuff!!!  Thanks Bill!!! Have a few Mopar tips – Post them up or drop me a note @ agcarestoration@cox.net and we get you video/tip posted on the site. Thanks for reading Tim                 Introducing …

Project BeepBeep – 68 RoadRunner – Body Bumpers Kit

Bill takes a look at MOPAR Body Bumper Kit for #ProjectBeepBeep and shows a common mistake made when a car is painted.   Bill is correct that the bumper are painted over show an oversight that might just tank the value of your car. I grew up working in my Dad’s body …

Project BeepBeep – 68 RoadRunner – Disc Brake Conversion Part 5 and Some Dash Work

Welcome back to #ProjectBeepBeep. Bill is working on finishing up the brake conversion. Here is a progress update. Note:  I forgot to add the credits for these videos:   Starring Bill B as himself; BeepBeep as ’68 Road Runner; Wild E. Coyote in effigy Camera Production; Mrs. Bill B and SamB Editing Tim …

Project BeepBeep – 68 RoadRunner Dash Update

Welcome back to #ProjectBeepBeep.  Thanks for checking in on the progress of Bill’s 1968 Plymouth Road Runner. If you recall mixed in with some brake updates,  Bill mentioned that he had sent out the circuit board for a restored.  Here is an update on the status of the dash.     Next up an …

 

 

Project BeepBeep – Oil Pan Gasket Part III

Wrapping up the oil pan gasket and what’s next for the 68 RoadRunner?

Take a look:


I have to add my note and this might rub someone the wrong way but I am going to toss it out here.

I took my 1970 Mustang to a shop run by a guy I trust with my cars.  After getting the Mustang back I leaked from two spots.  When I asked his mechanic about the said  “Old cars leak.”   That phrase really irritates me every time I hear it.   This day in age with all the improvement in gaskets from rubber to rubber coated metal to make your or form you own, this just no reason for your car to leak.  After the incident above, I took my Mustang home and replaced the gaskets and drove it for about a week and then went back to my friends shop and had the mechanic look under the car…it was bone dry.

Unless you have a part that can’t be found there is almost no reason, given all the options, for your old car to leak.   Having said that, Bill makes a good point – there are times when a leak, a non-engine killing leak, becomes to expensive or time consuming to fix.   But if I know Bill, you’ll be seeing a video with him fixing all the leaks.    (;^o)

Thanks for reading.

Tim

 

 

73 Mustang (Project SportsRoof) Engine Dress Up and Venting/Vacuum

Did you think I sold #ProjectSportsRoof?  Nope.  I’ve been busy and I’ve been serving as editor to another cool project – my constant reader Bill’s ’68 Plymouth RoadRunner (#ProjectBeepBeep). However, I have been doing some work on the sports roof and in this video you’ll see a little bling under the …
Introducing #ProjectBeepBeep – Code H 1968 Road Runner

I’d like you to take a look at one of my constant readers classic muscle car. First let me say that Bill has been an a long quest to find a car to replace this car:   Back in the day. It was a long search with lots of phone calls with many …

 

68 Road Runner Gets it’s Beep Beep back!!

While trying to warn a real life coyote of his ‘rapid’ approach, Bill’s 1968 Road Runner (#ProjectBeepBeep) failed to  issue the famous BeepBeep, or was that just part the car’s instinctive DNA based response to coyotes in general?

Either way Bill tackles the problem.


Here’s a shot of the horn.

 

More coming up on #ProjectBeepBeep and #ProjectSportsRoof.

Thanks for following our projects and find us on FaceBook @ www.facebook.com/AGCarRestoration/

Tim

Introducing #ProjectBeepBeep – Code H 1968 Road Runner

I’d like you to take a look at one of my constant readers classic muscle car. First let me say that Bill has been an a long quest to find a car to replace this car:   Back in the day. It was a long search with lots of phone calls with many …

Project BeepBeep – ’68 Road Runner – Drum or Disc – The Decision

1968 Ply Road RunnerProject BeepBeep Welcome back to #ProjectBeepBeep.  Bill is looking at the brakes and gets some professional assistance to help him make a crucial decision.  You know if you’ve got a lot of GO…you need a lot STOP. It not an easy decision to alter a car’s originality, especially …

Project BeepBeep – ’68 Road Runner -Disc Break Conversion Part 2

Thanks for checking back in on #ProjectBeepBeep. Having made the decision to convert the front brakes from shoe to disc Bill gets started with this major project for #ProjectBeepBeep. He went with a kit from Dr. Diff and here’s a brief look at some of the contents.   Nice shiny new rotors!! Spindle …

Auto Factoids for 12/17/2017 Datsun 510, Lexus, Ford Probe

#AutoFactoids are back!!!  I will be changing them up a bit but they’ll still be fun.

Factoid – The Datsun 510 in the late 1960s it competed with the likes of BMW on the front lines of the then-new sports sedan category. Paul Newman use to race one.

Factoid – Lexus SC300 shared a lot of important parts with the now-legendary Toyota Supra, including the same straight six engine.

 

Factoid – Ford Probe was basically a Mazda 626, and was originally intended to become the new Mustang. Thankfully, those plans were scrapped because Ford was concerned of the back-lash.

Thanks for following #AutoFactoids.

Tim

Auto Factoid 9/8/2013 – 9/14/2013

Auto Factoids are back!!!!   Lets just get started. Happy Birthday (Sept. 8, 1903) Preston  Tucker – nice cars!!!   On Sept 9th 1935 Studebaker put the first car on a Pennsylvania RR rail car headed to NYC  but the final destination was London.  (Actually there were 163 cars in that shipment.) These are …
Auto Factoids – Chevy’s LS9

Here some interesting facts for the new in 2008 LS9 engine. – It was a combination of upgraded LS3 and LS7 components  and took 3 years to develop – All 2000 units were hand-assembled in GM’s Performance Build Center in Wixom, Michigan -It displaced 6.2 liters – Bore and stroke 4.06×3.62 with a compression ratio of 9.1:1 – …

Abandoned Car – Racing Days Are Over.

I don’t know what it is about abandoned car, but they seem to grab my attention.  I can spot them “a mile away”.  Behind out-buildings, stashed in old barns or just sitting in a field somewhere.

Beside being a history buff (and a history teacher) I know a lot about the cars and their history, but a single car has is ‘personal’ history.  Where as it been, who owned it and how was it used?  I have a very bad inclination to immediately begin to assess an abandoned car’s potential. What could it be, again?

Not much mystery to what these cars were used for.  These were sitting out in the back area of a local race track.  Totally spent as race cars….OR….are…they?!?!?!!?

 

Clearly this one started out as a Camaro.

Lots of make-shift sheet metal but again a Camaro or Firebird .

Just a shell of what it used to be. But I bet it can be brought back to life.

Just need a seat!! Oh..and an engine, transmission and gauge need to be but back in place!!

Just need a little sanding and some clear coat! Right?

Got an abandon car pic you want to share?  Find me on Facebook and post it up.

Thanks for reading.

Tim

 

 

Kart Graveyard – Death of an Industry

While wandering around a small town in Southern Arizona my wife and I came across this kart display which I dubbed “Kart Graveyard”

Some of these cars in the pictures above had complete brake systems and somewhat refined steering.

Finding this graveyard got me thinking about the manufacturers of these cool play things and I ran across this website and shared it here.

http://www.e-kmi.com/ArchivesPost2005/ft/THE SLOW DEATH OF AN INDUSTRY Opinion by Darrell Sitarz.htm

THE SLOW DEATH OF AN INDUSTRY Opinion by Darrell Sitarz

In the 1990s, the American fun kart industry was churning out nearly 200,000 units annually by nearly 3 dozen manufacturers. Today, there are only a handful of fun kart makers still remaining.

So, what has caused the downfall of what was one of the largest portions of the go-kart industry? Some cite the high cost of liability insurance, some say it’s the imported karts or the ATVs while others think it’s because of cost of mandated safety features which added to the overall cost. It may be one or two, or it may be all of the above; so let’s look at it item by item.

COSTS
In the mid-1990s, the US Consumer Products Safety Commission targeted the fun kart industry and asked it to look into setting manufacturing guidelines and to increase and standardize safety features. With those as goals, the American Fun Kart Association (AFKA) was formed by the manufacturers and suppliers and standards were subsequently set. The AFKA was commended by the CPSC on their ability to take on the problem and do what was necessary to help insure public safety. The solution to the safety problem however led to another, that of increasing the cost of manufacturing a kart, the cost of which was, of course, passed onto the consumer. At that time, a few manufacturers decided to cease production feeling they could not compete in the marketplace due to the increased manufacturing costs.

IMPORTED KARTS
With costs rising, some manufacturers went overseas with an eye to reduce costs by importing karts.

“The problem was that the overseas manufacturer would make three vehicles. One was for their customer in the states and two for them to bring over here and sell under a different brand name,” an industry source said. “This would give them a foot hold in the US with a proven design that had historically sold. They could sell it cheaper because it came with their own engine that looks very much like a proven US motor and they don’t pay product liability insurance.”

So in essence, the manufacturers that went overseas were now competing with themselves. The results: more manufacturers went down the tubes.

ATVs
And here’s a strange twist of fate. Back in the late 1980s three-wheel ATVs were banned because of safety concerns in the US. Suddenly wham!, the fun kart industry began it’s upsurge in sales again topping out at nearly 200,000 units annually. So now what’s happened? The resurgence of the “new” ATV, a four wheeled version with more features and major off-road capabilities has also had a hand in the downfall of the fun kart industry. In 2004 for example, 817,000 ATVs were sold which is 4 times the amount of go karts in the industry’s best year.

PRODUCT LIABILITY INSURANCE
The slow death in the industry was caused by several factors, the main one may have been the tremendous cost of product liability insurance. It got to the point that most of the kart makers could not afford it.

“The manufacturers were not supported by the insurance companies that would accept premiums and not fight the cases but would make settlements and in turn would raise the rates for all kart manufacturers,” a reliable industry source told e-KMI. “Lawyers would represent the karts owners because they knew there would be a settlement and they would get paid. Getting hurt today is like winning the lotto but even better because it is tax free! People don’t have to accept responsibility for their actions because there are lawyers that will represent you know matter how stupid your action was because “we will get you something”.”

One or a combination of all of the above have taken their toll with the fun kart industry. But whatever the case may be, the industry appears to be in serious difficulty and is looking for answers, if there are any?

The following is a partial list of US fun kart manufacturers which have gone out of business or have ceased fun kart production since 1990.

Action Fun Karts
Avenger
Bird
BKS
Brister’s Design and Manufacturing*
Brister’s Thunder Karts
Clark Karts
Chief Karts
FKL
Fun Karts LA
Hamilton Brothers
Hang 10
Hoffco
Karts International
K-C Manufacturing C., Inc.
Klipper (not producing fun karts but still making promotional go-karts)
Midwestern Industries (acquired by T & D and now producing promo karts)
Minati (Brave Industries)
Murray*
Moto Machine
Performance Industries
Polaris (never made karts but had Brister make karts to test the market)
Robron
Simplex
Scat Fun
Tiger Industries
Trampolking
USA Industries
Yerf-Dog*

* Ceased fun kart production in 2005

Current US Fun Kart Manufacturers:

Carter Brothers
KartCo
Ken-Bar
Manco

 

Thanks for reading.

Tim

antique kartsantique karts

 

Project BeepBeep Gets Some Spark!

Bill tries out a custom set of spark plug wires for #ProjectBeepBeep.

 

Bill has more coming up on his 68 Road Runner and I might just have something to post of on the Corvette and the #ProjectSportsRoof.

Thanks for reading.

 

Tim

#ProjectSportsRoof

#ProjectBeepBeep

Introducing #ProjectBeepBeep3 – Code H 1968 Road Runner

I’d like you to take a look at one of my constant readers classic muscle car. First let me say that Bill has been an a long quest to find a car to replace this car:   Back in the day. It was a long search with lots of phone calls with many …
Project BeepBeep – ’68 RoadRunner – Door Panel Tips

Ready for some more #ProjectBeepBeep4?  Bill takes you through a few tips for restoring your B-Body door panels. Take a look:     Great stuff!!!  Thanks Bill!!! Have a few Mopar tips – Post them up or drop me a note @ agcarestoration@cox.net and we get you video/tip posted on the site. Thanks for reading Tim                 Introducing …
Project BeepBeep – 68 RoadRunner – Body Bumpers Kit

Bill takes a look at MOPAR Body Bumper Kit for #ProjectBeepBeep5 and shows a common mistake made when a car is painted.   Bill is correct that the bumper are painted over show an oversight that might just tank the value of your car. I grew up working in my Dad’s body …
Project BeepBeep – 68 RoadRunner – Disc Brake Conversion Part 5 and Some Dash Work

Welcome back to #ProjectBeepBeep6. Bill is working on finishing up the brake conversion. Here is a progress update. Note:  I forgot to add the credits for these videos:   Starring Bill B as himself; BeepBeep as ’68 Road Runner; Wild E. Coyote in effigy Camera Production; Mrs. Bill B and SamB Editing Tim …