This one is for the C4 crowd (You digging this one Tony Z.?) There will be two winners one from Corvette Pals and one from my blog. Here is what I’m looking for. I use to auto cross my 1984 Crossfire (still do SCCA with my C6) and I love to see the C4 in action.
So post of a video of your C4 in action (action photos are ok too!) – Nothing illegal (snicker) or unsafe, mind you. Burn outs, auto cross, drag strip…Looking for some action shots. Post them up at https://www.facebook.com/pages/Average-Guys-Car-Restoration-Mods-and-Racing/185827701454279 and mention The Average Guy’s Car Restoration, Mods and Racing blog.
OH…what’s the prize? How about a 1984 Red Corvette promo model in the original box or a 1984 Silver C4? These are the model cars the dealerships give away. Can’t win if you don’t play…can’t win if you ain’t got a C4!!!! Game on!!!
1984 Silver C4 Promo Model - Yes those are Mustangs in the back ground!!!
Not only is there a ton of beautiful cars at Barrett-Jacksonauctions, there are also a lot of venders. Anything from car care products, to engine builders to custom building shops.
One of those was Karl Kustom Corvettes located in Des Moines, Ia. I had a chance to speak with Jim Hidy one of the reps for Karl Kustom at the auction this past January.
SWEET!!!!
Nice looking car, yes? HELL YES. But there some interesting things I didn’t know about these custom Vettes and how they are made.
I spoke with Jim at length and I have to tell you that how I thought these were made wasn’t even close and how they are made was pretty surprising to me. Jim set me straight.
Great Creation
These are of course C6 machines with the look of the 60’s Vettes. All the great handling and power of the C6 underpinning and classic looks. I thought ‘how cool they manufacture a body that snaps on the C6 frame. But that’s not how it’s done.
So I’ve gotten the new electrical connection installed on the switch. I now need to cut off the old switch and strip the wires.
Ya know it’s hard to take a video while you a squeezed under a car on jack-stands!!!
In this video you can see the striped wires.
Installing the bracket was easy enough except that it wasn’t formed properly and had to be bent. Keep in mind this is not ‘harden’ steel and too much bending will weaken it and when the reverse lever comes back will just push the bracket backward and not allow the button to be depressed enough to make contact and complete the circuit and turn the backup lights on.
Here it is all installed.
Here it is with the car in the reverse position. You can see the button depressed.
Here is a video shot.
And the intended results:
Now I’d love to tell you that all was well, however remember the bolt and the Sharpie mark I made on it so that I could gauge how far to screw it back in?
Well I was still pretty happy with the progress and I took the car off the jack-stand and started her up and backed out of the garage. That went well, but there didn’t seem to be a first gear once I decided to pull the car forward, nor second gear. She isn’t going to move.
So I’ve got the car out of the garage and right at the edge of the drive on the driver’s side. I have to get under the car and tighten that bold a few more turns. I end up laying partially on the drive way, partially on the rocks (we don’t have grass in your yards here..we have small, gather in you pants when you are laying on them, sharp rocks) and partially on one of your shrubs. Ok, lets not forget the glowing hot Hooker header pipes..yeah…just back out of the garage…no worries the hair on my arm will grow back. Any way, I tighten it just enough to get the car to go into second gear and pull it back into garage.
It had to go back up on the jack-stands for more adjustments, and I had to the switch off once to make adjustments to the bracket. But success was achieved!!!!!
This is for a National Motor Museum Mint, 1934 Ford V-8 Deluxe die-cast model car.
1934 Ford V-8 Deluxe Roadster
In 1934 these cars would cost you a whopping $710. There were about 6,863 produced each powered by a 221 Cubic Inch V8 with 85 horse power. To day in top condition these beauties fetch up to $40,000.00
Comes in the original packing with the Certificate of Authenticity. These are great collectible cars.
HOW TO WIN:
Email (timsweet@cox.net) or post a picture of your 1930’s or 1940’s car and a quick note about it – no matter the condition.
I’ll collect them and post them up. The readers of my blog will vote. The winner will be mailed the car, however I don’t need your mail information unless you win.
NOTE: ANY CONTACT INFORMATION IS PRIVATE AND IS NEVER RETAINED AND NEVER REUSED. IF YOU HAVE ANY QUESTIONS CONTACT ME FIRST, BEFORE PROVIDING YOUR MAILING ADDRESS.
A quick recap, I had a 1967 Ford Mustang Shelby manual 4 speed transmission rebuilt and installed it in my 1970 coupe. This included a Hurst Competition Plus Shift Kit. Of course the configuration isn’t even close to the original 3 speed and the old bracket for the reverse light switch won’t go back on.
I didn’t really think of this as the time of the installation so I just zip-tied the wiring and old switch up until I picked up the conversion part for the Hurst kit. This included a reverse light switch and a properly formed bracket. Cost was about $29.00 at the same local hot rod shop I bought the shift kit from – they are car guys not salesmen, which is why they didn’t mention the light switch bracket.
Don’t asks me why I felt the need to take video of the kit still in the package but here it is:
As you can see in the video below. The switch had two screws as posts for the wiring, new switch..old school technology. Basically you’d wrap the end of a wire around the screw and tighten, not a great connection for hanging under a car, nor for the amount of vibration the 302 dishes out. Used the screws and the small ‘lock” washer to hold the electrical connectors in place. That will last.
If you paid attention to the recent Barrett-Jackson auction or read my blog (http://wp.me/pKHNM-QF), you might have seen this car and know that it was sold for $100k.
You can research and find out a lot of information. But as Paul Harvey use to say…”And now…….the rest of the story.”
The Crow Lakester
Headlights are from a 1937 Packard
Steering wheel is a yoke from a 1948 Rockwell Aero Commander.
Looking over my morning emails, I come across my Hemmings daily email. Love getting these and sometimes I share an article from them.
On the right hand side they spotlight (or maybe as a seller you have to pay extra for the placement) some of the cars that are listed with them for sale. Today there is this 1963 Corvette:
For just over $15K you can pick this up. Worth it? Tires and rims look new!!!
This is my 500th post for Average Guy’s Car Restoration, Mods and Racing blog (my one and only blog). It has become a bit more board in scope than what I originally intended, but if you are a total car nut case, like me (my wife uses the “o’ word) and have AADD (automobile attention deficit disorder…..HEY..that could be REAL…you don’t know that it’s NOT!!) you want more than just a Chevy or more than just 1950’s cars. You’ll be drawn to others. (“Drawn” makes it sound like a slow process…but picture a disco era strobe light…yeah that’s a but closer to what I’m trying to describe.) I’ve moved fairly close to the edge, having a ’70’s car and a 2007 model and mixing technologies and brands, Ford and Chevy. (I need a MOPAR and a Citroen.)
Of course one of the fun things that keeps me blogging are comments, not so many posted here, but a ton on Facebook and Twitter and now even Google+. I like when a reader’s comment sparks a blog entry instead of just sitting there. That brings me to the subject of this piece.
Bill is a frequent reader and leaves comments on a regular basis. In my recent entry on the 1957 DeSoto Adventurer sold at Barrett-Jackson in Scottsdale, last weekend Bill wrote this:
Bill
Submitted on 2012/01/28 at 6:12 pm
DeSoto was Chrysler’s Oldsmobile, and I think it was unappreciated both by the public and Mother Mopar herself.
Back when I lived in San Jose, CA (actually Santa Clara) in the early 1990s, there was a 1957 Adventurer 4 door parked in a driveway with four flat tires in a neighborhood near mine. I think the car had been registered last in 1979. The body, chrome, glass, and even the interior seemed in excellent condition, yet I knew the car needed more than just TLC to become roadworthy. Each time I passed that car I wanted to leave a note and see if I could get it cheap enough to restore.
I know that 4 door DeSotos would not be collectible, or bring the big money, but somehow this car seemed to be in good enough shape that it was worth saving from being just a donor parts car. I’ll be in San Jose on business soon, and will make it a point to drive by and see if the car is still there.
Have a nice day, Bill
It’s true that in the past 4 door versions of classic cars of the 50’s and 60’s lagged as far as pricing and collectivity. But that is changing. I as work to finish up my classic car auto appraisal certification, I’m finding that, much like the cars of 1910-1940’s, 2 extra doors aren’t hurting the price they’ll bring. Just take the trend of station wagons – sure at Barrett Jackson’s you’ll only see the two door(plus tailgate) and they’ll bring ‘bigger’ money, but 15 years ago, only crazy people had wagons restored. But the prices for cars like the Pontiac Safari wagon and the Buick Vista Cruiser (Sports wagon) are bringing higher prices. (Actually I think it was Olds Vista Wagon and Buick Sports Wagon.)
58 Safari Wagon
69 Buick Sports Wagon
I’m still quoted as saying that my Mustang, because it’s a coupe and not a fast back or a sports roof, will never to be worth what I’ve spent in restoring it. Interestingly enough, you can start finding them on the web and Ebay for $16k. One recently sold for a bit more than that and it to was a 302 with 351 heads and a wing. So these things are changing. Publications like Hemmings and others are often recommending the purchase of 4 door 50’s and 60’s cars. In part because they are well priced and with the after-market bolt ‘ons’ and drop in crate motors, you can take what was originally under powered 4 door and make it a rubber melting monster.
So go get those 4 doors. Winch them out of the barns and ditches, drag ’em home, restore them back to life and drive ’em!!!!
And I hope that Bill’s DeSoto (see I already have him owning it) is still there and at the least can grab us a few pics. And if you can get some contact info for the owner, I might add a pre-MOPAR to my driveway. Thanks for the comment Bill.
As it was a nice day, and the sun was threatening to make an appearance, I decided to pay a visit the the new-years dayclassic car show ‘Vintage Stony 2012′.
I’d been thinking of dragging my beetle out of hibernation early for this one but as I was a little late getting up, it remained in the garage.
I think this may be the third year that the new years day show in Stony Stratford has been held, and the first time I’ve made it along. I was surprised how busy it was, both car parks were already full and there were lots of people walking around by eleven o’clock when I got there.
Not too may Volkswagens around though. A few nice split screen vans and some Porsches, also a Tatra which was nice to see out and about. I’ve posted some pictures of the VWs and Porsches plus there are more pictures of other marques on Flickr.
This fantastic car sold for $225,500.00. See pic and video blow.
Year: 1957
Make: DESOTO
Model: ADVENTURER
Style: CONVERTIBLE
VIN: 50417567
Exterior Color: GOLD
Interior Color:
Cylinders: 8
Engine Size: 345
