Sometimes we forget how things evolved when it comes to the functioning of our cars. Sometimes to understand how they work its helpful to go back in time and view how the problem was solved.
Take for instance this 1937 GM film on how to solve cornering.
Thanks for reading.
Tim
As you know (I assuming here), a “sleeper” car is one that on the exterior looks “average” (that it’s normally understood as referring to “slow”) under the wrapper, it’s a fire breather.
I was reading a special edition of ……the best auto periodical publisher in the WORLD (normally understood as referring to “ever existed”) Hemmings’ Muscle Machines – All Modified….and came upon an article entitled “Sleepers” by Richard Brigidi.
He defined a “sleeper” car as one with no engine badges, no chrome or striping, but with a monster engine. The idea was back in the 1960’s as to hide the fact that you had mega HP under the hood. Of course back in the day, street racing was common (although non-legal – just like today) and often it was done for cash or “pink slips”, so hiding (or at least under stating) that fact that you’ve got a super power plant would be a benefit.
I’ve always liked the thought of having a poverty wheeled – rubber burner and always had in mind a plain-Jane Chevy Biscayne.
Or maybe a plain old Mustang coupe?
What’s your idea of a sleeper car? Drop your idea in a comment below.
Thanks for reading.
Tim
Some time ago I wrote about repairing my 1984 Corvettes door panel. The panel its self was not well made … read “cheap” and didn’t stand up well to time/use. Unfortunately, I can’t say there was any improvement in “quality” of the door panels in my 2007 Vette. But this project isn’t a Corvette door panel, but my son’s Chrysler LeBaron.
The LeBaron is 1990’s car and the door panels are 1990’s cheap, no nice way to say that. This quick project was didn’t start out about the door panel, other than we had to take it off to check the multiple window control switch. The window controls were part of a plastic insert that also has the remote control for the drivers’ side mirror poked through it. It stays put, normally by 3 prongs that push into “V” clips that are on stand-a-lone braces that are mounted on the door panel directly – but not well done.
Since the insert has slid down over the past few months, it seemed that either driving vibrations and/or normal door operations, so while we are in there we’d push the prong back in. Seemed simple enough.
The back of the panel a fiber board/plastic composite – not really fiberglass but similar and it’s pretty sturdy.
Back side of the door panel.
Here you can see the brackets I mentioned above. However, the way in which the bracket are attached to the board is meant to last forever. They are held together with bits of glue in holes along the edges of the bracket. In the heat of Arizona and the great condition our roads are in (tongue in cheek) this type of connection is not ideal.
Here you can see the glue the back of the bracket and that is oozed out into the holes.
This image below is the results of the glue pulling off – separating from the fiber board.
Part clue – Part fiber board. This was laying at the bottom of the door panel
I’ll finish this up in the next post.
Thanks for reading.
Tim
Great work on this one. I love the engines in these cars!!!!
Tim
I re-posted a discussion on “Would You Take A Viper Over A ZR1?” (http://wp.me/pKHNM-1nH). To me there is really no discussion to be had. There is absolutely no way I’d select a Dodge Viper for a ZR1. Heck, there’s no way I’d select a Viper over any Corvette (even the ugly, big butted C5’s). Yup, even over the horse power difference.
It is mainly the design. The Viper looks like the it’s either broken in the middle or was two cars shoved together. Check this out?
So here ya go – the curve of the hood and rake of the windshield make he look “bent” at the vertical line drawn on the fender. The bump where the side exhaust starts the bent look. The door is hinged inside what would normally be a fender brake cooling vent. Then notice the back-end – it looks familiar, yes like a Mazda. It really looks like a sports car got been by shoving a Mazda Miata in its trunk.
Now take a look at a 1992 Corvette ZR1.
Let rake in the windshield and the brake vents are as they should be!!! Great lines!!!
Collector for a 1992 Viper vs. the 1992 ZR1 is a little one sided with the Viper about $15k more than the Vette, so for investment purposes the Vipers the one to own.
Your thoughts?
Thanks for reading.
Tim
Here is another drive by. As you know these are in fact drive by – but shooting with a camera!!!!
We saw this on near down town Tucson, Az.
She needs a little work but it seems the owner drives it. I love the suicide door and the 9 windows!!
The Chrysler Royal was an automobile produced by the Chrysler division of the Chrysler Corporation between 1937 to 1942 and 1946 to 1950. The Royal represented the entry-level Chrysler during its production,[1] making it the most affordable Chrysler model. The Royal was replaced at the end of 1950 model year by the Chrysler Windsor.
Own one of these? Drop me a note.
Thanks for reading.
Tim
Lacking updates of late for good reason.
It’s strange thinking that if I don’t post photos, it feels like i don’t shoot……Having the style and aesthetic of a photojournalist/documentary photographer, the process really isn’t finished until I share with like-minded people.
Over the last month I have purchased and currently importing my future wife…….a 53 Belair Hardtop
